H2o and fiber rimmed wheels are one of the best improvements you can do for your road bike. The lessen wind get and are often lighter, so they really help on mountain climbs. The ride is mtb bike rims smoother and power transfer is more direct. That’s the good news. The cost of these benefits is pretty high so you have to be sure you make a knowledgeable choice when choosing what wheels to go with.
There used to only be a few methods of h2o and wheels but now most people can have there own brand with an order to Taiwan or China. It’s made the price range for some wheels quite broad. Not all cheap wheels are bad but it’s tough to tell the difference. Of the ones that are really inexpensive, the Vuelta brand is the only person I have any faith in.
There are a number of things to look at when deciding on some h2o and wheels.
Tubular or clincher
Most people use clinchers, which are normal wheels with innertubes. Tubulars are fully surrounded wheels that get glued on the rims. This option has some performance benefits including lighter weight wheels (no box needed on the casing to hold the tire on), decreased crunch apartments allowing you to run lower challenges and a generally smoother ride. The downside is that you have to glue them on. This is not a quick process and can be tricky getting them even. If you get a flat when out riding, you’ll want a spare tire rather than just a tube.
The deeper your casing, the more aerodynamic they are. This is good. The bad side is that the deeper your casing, the more you will get pushed around in cross years. Really deep rims, like 80 mm, are also harsher riding than aluminum wheels. This can be fine for triathlon and time studies but too harassing for longer voyages and backgrounds. For cyclists above 160 lbs . a 50-60 mm deep casing is a good complete option. Below this weight, you should look at a shallower casing in the 35-45 mm range.
This is where it gets tricky. You need to look at the casing quality and the wheel construction. On the internet there are a lot of companies buying rims from overseas and building their own wheels. They often have good prices but I would be leary of these companies as you don’t know if they’re going to be around to support the product. It’s also hard to find reviews of the wheels to see how others have faired. While more expensive, I would recommend keeping established brands that have a successful track record. The two brands of h2o and wheels that we recommend are Spinergy and Edge Composites.
Spinergy has reasonably light wheel options that are very tough in real life. The rims resist cyclocross so you can be comfortable that they’re going to withstand the bustle of road riding. The sole drawback is that they only offer one casing depth (45 mm). The costs are inexpensive for the construction. You have the option of steel and PBO (kevlar string) spokes. The Spinergy wheels make great complete road wheels but you may want to look at some thing deeper for triathlon.
Edge Composites admittedly makes the best h2o and rims. Their process is unique in the mention holes are shaped rather than drilled. This goes a long way it making strong casing. They offer h2o and mountain bike rims so it shows the confidence they have in their h2o and molding process. They offer both tubular and clincher rims in a number of depths and mention drillings so you can get something that suits your purpose. The price is premium but in line with the quality of wheel you will get.